SALVAMAC GROUP

https://salvamac.com/en/cross-cutting/classic-40/

https://salvamac.com/en/cross-cutting/classic-50/

https://salvamac.com/en/cross-cutting/classic-60/

Innovative automatic and optimizing cross-cutting saw. The automatic optimizing saw SalvaPush_2000 is born from over twenty years of experience in wood optimizing saws.
The machine is the ideal solution to increase the yield of wood, to reduce the worked hours, facilitate staff activity, cut costs and increase profits. The operator has just to mark the quality of the wood and the presence of defects, the optimizing saw will do the rest. The machine cuts the best possible combination of measures, reducing waste to a minimum and improving productivity, all in total safety.

• The feeding system works with numerical control. The computer and the servo drive are connected via an EtherCAT connection.
• The electronic brushless Servo Driver motor guarantees maximum precision reducing power problems.
• Special 25 degrees inclined plane to help the loading and keep the work piece squared without increasing the working height.
• Very robust carriage of the pusher unit: it must be solid and reliable. Dimensions are about mm. 300x345x25.
• The reading system is composed by a laser photocell that recognizes the presence of the board and a luminescence reader for the fluorescent marks.
• The special system with toothed belt width 50 mm. 33 strips of hard steel inside of high precision allows to not suffering dust and service problems.

The cutting Group

The SalvaPush_2000 structure is made of hard steel to guarantee reliability and long life. The cutting unit has an inclined plane of 25 degrees as all the feeding area. In our optimizing saw Salvapush_2000 the smart pressing hood, after the first cut, adapts automatically to the thickness of the board. The machine is completed with two electro-pneumatic sidealignment devices, both inside the machine unit, one before and one after the blade.

Operational electronic Management System SALVA-OPTIM

The electronic management system consists of a numerical control and integrated computer of the latest generation to encourage the speed of communication up to less than one millisecond. SALVA-OPTIM Software the ease of use and graphics reflect the main systems of smart electronics. Some sections of the program are dedicated to statistics and cutting results, with updates in real time, diagnostics and video messages. The software allows to have the complete management up to 5 cutting qualities. The 12″ touch screen of high resistance is positioned to facilitate the reading and the digitation of the data and included a USB connection and a ready to use Tele-service Software via Internet.

More information

The electronic stop for pushing, stopping and positioning the profiles to be cut. We thought SalvaStop_100 as a fundamental component to give your work an edge. Through numerical control, this electronic stop manages the push, stop and positioning of the profiles to be cut, regardless of the material. So you can reduce human errors, avoid waste and decrease labor costs. You can say goodbye to the tape measure!

The characteristics of this technological stop have been designed to make your work easier and safer, increasing efficiency and decreasing costs.

• Servo drive motor closing loop: 11 Nm
• Power requirement: 230 volt 50 Hz
• Arm length/plate included: 600 mm / 200 mm x 100 mm
• Capacity with roller conveyor: up to 100 Kg
• s-PAD touch-screen: 7″
• Max length and stroke: 7000 mm / 6400 mm

The beam

Due to an innovative technological concept we have created a new anodized aluminum beam- section mm 100×100- reinforced and with big thickness of the profile edge. This beam has got 3 sides with groves to adapt and install the structure. One side is a flat fence to favour the sliding of the wood on the guide so that to avoid wearing and dust problems. Thanks to the considerable dimensions of this solution, the pusher carriage reaches a movement speed of up to 60 meters per minute. The transmission system has a 32 mm wide toothed belt, with high precision internal steel cables, ensuring a wide capacity and a very high positioning tolerance. The machined steel heads are robust and independent, designed to have a long life, highly reliable and precise.

s-PAD and software

SalvaStop_100 is integrated with exclusive software that is easy to use thanks to an immediate, easily understandable and complete graphic interface. The s-PAD color touch-screen display has been designed to be in a perfect position to read and writing, also facilitated by a comfortable digital keyboard. In this software, which has a USB connection, the internet teleservice is included and installed.

Salvastop system has two main operating modes – “Stop” and “Push” – and a total of 5 different sections:

• “Stop” mode for single-length positioning or the possibility of recalling predetermined measurements.
• “Push” mode with repeatable fix cycles with 100 possible cutting lists.
• “Jog” mode and automatic reset.
• Wide possibility of customizing the parameters.
• Diagnostic and teleservice connection system.

Electronic hardware

The compact Servo Drive electronic motor guarantees simplicity, reliability, durability and efficiency. With this innovative technology you can manage closed loop positioning, checking the position at any time, even in case of heavy efforts and accidental external pressure. The motor, that is mounted in pulling position, has a power of 11 Nm and the electrical and electronic inputs and outputs are integrated on the engine itself. Finally, the emergency and start buttons are ergonomically positioned, to facilitate the operator’s work.
 

More information