Gerhard Koch Maschinenfabrik GmbH & Co. KG

The edge-banding machines ENDMASTER-K base.line of the ENDMASTER-K series are single-sided machines with manual feed and ideal for just-in-time production, for example of frame parts, furniture fronts or single-drawer components. They can accommodate a wide variety of edge materials and standard adhesives.
The KOCH machine ENDMASTER-K base.line is equipped with an edge-banding unit as well as with a shaping unit. Furthermore, the edge-baniding machines can be additionally equipped with the following options:

• Second shaping aggregate
• Storage for five different tape coils (manual change)
• Horizontal drilling unit

KOCH edge-banding machines ENDMASTER-K are categorized accorinding to their level of equippment into our product groups base.line, pro.line and select.line.
 

More informations:
http://www.kochtechnology.de/en/products/single-view/maschine/endmaster-k-baseline/

KOCH ENDMASTER-P base.line is a single-sided hot-foiling machine with manual feed and ideal for just-in-time production, for example of frame parts, furniture fronts and single-drawer components. The hot-foiling machines are equipped with a chamfering unit as well as a hot-foiling unit. Additionally, the ENDMASTER-P base.line machines can be equipped with the following options:

• Drilling unit
• Dowel insertion unit

A complete workpiece processing through enhanced equipment for shaping, drilling, glueing and dowel insertion is possible on machines fo the ENDMASTER-P serie.
KOCH hot-foiling machines ENDMASTER-P are categorized accorinding to their level of equippment into our product groups base.line, pro.line and select.line.

More informations:
http://www.kochtechnology.de/en/products/single-view/maschine/endmaster-p-baseline/

KOCH S-250 trim saws are for wrapped and veneered profiled rails, drawer parts and other furniture components. The trim saw S-250 can work as a single machine or in an automatic production line. The machine is a trim saw for multiple lengths and final cut. S-250 trim saws are equipped with a hopper feed (manual or automatic infeed), a stock separation, the trim saw station, as well as a lateral alignment and clamping cylinder in the trim saw station. Brass-counter parts guarantee clean cuts.

Optionally, the S.250 trim saw can be equipped with either a cross infeed with stock package separation or a cross infeed of single pieces with stacking.
 

The drilling and dowel insertion machine SPRINT pro.line from KOCH is a high-end performance machine optimized for just-in-time manufacturing. The SPRINT pro.line captivates with flexible handling of all drill and dowel patterns as well as of varying workpiece dimensions. Another advantage of the SPRINT pro.line is, that it pratically has no downtime and only a minimal set-up time for program reconfiguration.
The dowel and drilling machine has recently been reconfigurated and is now equipped as followes:

• 4 working fields
• Max. workpiece width 1600 mm
• Horizontal drilling station with 2 individually controlled spindles
• Vertical drilling station from above with 3 individually controlled spindles
• Glue injecting and dowel insertion station
• ELC - Electronic glue control (KOCH patented)
• Safety curtain with lamellas as protection against reaching into danger zone
• NC-positioning in X, Y and Z
• KOCH WOP - Parametric programming
• 3 manually lowerable stops (center and side fences)
• Premium Remote Support - Service via Internet
• Central lubrication system
• Low voltage supply UPS

Options:

• Stock clamping system for small parts
• Barcode reader
• Max. workpiece width 2300 mm
   

More informations:
http://www.kochtechnology.de/en/products/single-view/maschine/sprint-proline/

The UNIDRILL, a drilling machine for 6-sided processing of straight and rectangular workpieces, is particularly of interest to manufacturers of drawers, frame components, profiled rails or furniture components.
The workpieces are separated in a hopper feed and then led to the working stations. They are processed in clamped position and transported out of the machine and onto a workpiece return feed conveyor for one-man-operation or onto an outfeed for the integration into a production line.
The machine is equipped for horizontal drillings into workpiece ends (both-sided) and into workpiece edges, as well as for vertical surface drillings from above and below. Thus, drilling operations from six sides are possible. Thanks to its modular construction the machine can be equipped with a dowel insertion station and/or a sawing station.
Furthermore, due to its compact and also sturdy design, the UNIDRILL needs only very little floor area, while maintaining high performance. Like all KOCH machines, the UNIDRILL is characterized by quality and accuracy at the highest level.

More informations:http://www.kochtechnology.de/en/products/single-view/maschine/unidrill-selectline/